A cold front is headed for Tampa Bay this week, and for a lot of Davis Islands homeowners it will be the first time the heat has run since last winter. That is exactly when we find out which heat pumps are ready and which ones are going to blow lukewarm air at 6am. The good news: you can test yours today, while it is still mild out, and get it fixed before you actually need it.
If you live in Plant City, our Plant City HVAC service area page lists the services we offer there and the neighborhoods we cover.
Our licensed techs at Nolan Air work on everything from the 1920s Mediterranean Revival homes along Davis Boulevard to the newer builds and condos near the yacht basin. Most of these homes run heat pumps, often with electric heat strips as backup, and almost all of them sit within a few blocks of salt water. That combination is great for mild winters and tough on outdoor equipment. If you want a pro to look it over, start with our Davis Islands HVAC service page.
Run a five-minute heat test now
Do not wait for the first 45-degree morning. Switch your thermostat from Cool to Heat, set it about three degrees above the current room temperature, and give it ten minutes. You should feel clearly warm air at the supply vents, and the outdoor unit should be running. If you get cool or room-temperature air, or the outdoor fan never kicks on, you have something to deal with before the front gets here.
Common reasons a Davis Islands heat pump will not heat
Thermostat settings. It sounds obvious, but we see it every season. Make sure the mode is Heat, not Auto or Cool, and that the fan is on Auto rather than On. With the fan on On, the blower keeps running between cycles and the air at the vents feels cold even when the system is working.
A stuck reversing valve. A heat pump heats by running the refrigerant cycle backward. The part that flips it is the reversing valve, and if it sat all summer in cooling mode it can stick. The symptom is a system that runs fine but only blows cool air in Heat mode. That is a repair for a licensed tech, not a DIY job.
Salt air on the outdoor coil. Living on the island means your condenser breathes salty, humid air off Hillsborough Bay all year. Corroded coil fins and crusted electrical connections cut heating capacity and can stop the unit from starting at all. A quick look at the outdoor unit tells you a lot: heavy white or green corrosion, flaking fins, or a lot of debris packed against the coil are all worth having checked.
Low refrigerant. A heat pump that is low on refrigerant struggles more in heating than in cooling. If the system ran a little weak last summer, it may barely heat this winter. Low refrigerant also means there is a leak somewhere, and topping it off without finding the leak only buys you a few weeks.
Heat strips that do not come on. Many island homes rely on electric heat strips in the air handler to back up the heat pump on the coldest mornings. Strips that sat unused for nine months can have a failed element, a tripped limit switch, or a bad sequencer. You will not notice until the temperature drops and the heat pump alone cannot keep up.
Emergency heat: when to use it and when not to
Most heat pump thermostats have an Emergency Heat or Aux Heat setting. Emergency heat shuts off the heat pump and runs only the heat strips. It is a fine stopgap if the outdoor unit is clearly broken, but it costs a lot more to run, so treat it as a bridge until a tech can get there, not a fix. If you notice the Aux Heat light coming on constantly in mild weather, that is a sign the heat pump is not pulling its weight.
That burning smell on the first cold morning
The first time the heat strips run each year, a faint burning-dust smell for a few minutes is normal. Dust settles on the elements over the summer and burns off. What is not normal: a smell that lasts more than an hour, a sharp electrical or plastic odor, or any visible smoke. In that case, turn the system off at the thermostat and call us.
Quick checks you can do yourself
- Replace the air filter. A clogged filter makes heat strips overheat and trip their safety limits.
- Check the breakers for the air handler and the outdoor unit. Heat strips usually have their own breaker.
- Clear leaves, mulch, and storm debris at least two feet back from the outdoor unit.
- Make sure supply vents and the return grille are not blocked by furniture or rugs.
- Replace thermostat batteries if your model uses them.
When to call a licensed tech
If the heat test fails after those checks, the outdoor unit is iced over and not defrosting, breakers keep tripping, or you hear grinding or loud buzzing, it is time for a pro. Our Davis Islands heat pump repair visits cover the reversing valve, refrigerant charge, defrost controls, heat strips, and the electrical connections salt air loves to eat. If everything checks out, a heating tune-up keeps it that way through the season.
We also take care of neighbors just across the channel on Harbour Island, plus homeowners up in Citrus Park and out in Fish Hawk.
Get ahead of the cold front
The days right before a front are when schedules fill up fast, so the best time to find a problem is now, while the house is still comfortable. Call Nolan Air at (727) 353-9293 Monday through Friday, 8am to 7pm, or book online and we will get a licensed tech to your Davis Islands home before the cold sets in. Learn more at NolanAir.com.